Client: Oak Ridge National Laboratory Objective: A blower door test conducted by Oak Ridge National Laboratory’s Buildings Technology Center proves the effectiveness of BioBased® Insulation in sealing a home’s building envelope. A 1,200-square-foot home constructed by the Women Build Program of the Loudon County Habitat for Humanity in Loudon, Tenn. was insulated using BioBased® 501, an open cell spray polyurethane insulation. Solution: The home was tested using a blower door to measure how well the building’s shell or envelope prevents outside air from getting inside. The BioBased®-insulated home experienced only 0.08 air changes per hour (ACH) at
4 pascals of pressure. A similar home was built by the Habitat group in 2005 with the same floor plan, and it was insulated with fiberglass. Upon completion, a blower-door test showed that the fiberglass-insulated home experienced 0.16 ACH at the same pressure conditions.
“The lower the number; the better the building envelope,” said Jeff Christian, director of ORNL’s Buildings Technology Center. “These results show that BioBased® Insulation provides the necessary air seal to make a house tight.”
According to EnergyStar, air leaks are responsible for 20 to 40% of the energy that’s used in a home. Properly sealing a home’s thermal envelope will increase its energy efficiency. As a point of comparison, ORNL also has worked with the local Habitat chapter to construct zero energy homes using Structurally Insulated Panels. SIPS are made by sandwiching a core of rigid foam plastic insulation
between two oriented strand boards or OSBs. “In those homes, the rate of natural air changes ranges from 0.04 to 0.08 ACH, which is very good,” Christian
said. “These most recent test results suggest that a well-built stick construction home with an envelope of polyurethane foam insulation such as BioBased® Insulation can come close to a SIP-constructed home in air tightness.”
The air tightness of a home might not seem like an important detail, but according to the American Society of Heating and Refrigeration Engineers, most houses experience 0.35 air changes an hour at natural pressure.
When the outside conditions include winds of 15 to 25 miles per hour, the number of air changes can increase drastically. What does this mean to a homeowner? Each year more than $13 billion worth of energy leaks from houses through holes and cracks. That equates an average of $150 per family in the United States each year.
Tight, energy-efficient homes save homeowners money, and with proper mechanical ventilation, they can have better indoor air quality than a leaky home. The BioBased®-insulated home included a supply-side ventilation system to provide fresh, filtered air into the home. By filtering and conditioning the air instead of counting on air infiltration through duct work or holes in the building envelope, homeowners are able to reduce moisture problems which could lead to mould and to block outside irritants and allergens. | 
